A recent research revealed that 80% of the computers today is infected with these dangerous spyware and most of the users not aware of it. (Your computer could fall into this lot too.) The most dangerous fact is, even though the anti-virus software is running, these software can even inactivate them and take over your PC.

Have you experienced any of the following?

• Awsome popups comes out of nowhere, when browsing the web

• Home page reset to some other site

How can this happen?

- The components installed when viewing certain sites, starts up and running as soon as it’s finished installing (or after the page is completely loaded) and with every windows startup since then. Their job is to collect information and report (or transfer) it to an external computer.

What is deceptive software? (Reference: www.microsoft.com)

Spyware and unauthorized adware are two examples of deceptive software. Deceptive software includes programs which take over your home page or search page without first getting your permission. There are a number of ways deceptive software can get on your system. A common trick is to covertly install the software during the installation of other software you want such as a music or video file sharing program.

Whenever you are installing something on your computer, make sure you carefully read all disclosures, including the license agreement and privacy statement. Sometimes the inclusion of adware in a given software installation is documented, but it may appear at the end of a license agreement or privacy statement.

Sometimes deceptive software gets silently installed on your system without any warning at all. If you use Internet Explorer as your Web browser, this can happen if your Internet Explorer security setting is set to its lowest value. Make sure to keep this setting at the medium level or higher. Doing so will help you control what is being installed on your computer.

Have you ever had an experience where you were repeatedly asked to accept a download even after you said no? Creators of deceptive software often use such tricks to get you to load their software. If this happens to you, do not click yes. Instead, try to close the Web page that first asked you to accept the download by hitting the X in the corner of the window. Alternatively, quit Internet Explorer and restart it to begin browsing the Internet again. If you visit a Web page that continually displays these tricky pop-up windows, that Web site may not be worthy of your trust.

Your computer may be infected by now, but you may not know. Just have a checkup with a software specifically designed for it, to know the status of your computer. You must clean infections once you find it and the game is not over yet. The spyware might reinfect your PC. So it’s highly recommended that you run a firewall on your system after the clean up. This will allow you to monitor every single communication occurs with your computer and block the ones which you feel unnecessary. The firewall acts as a barrier between your PC and the external world (Internet / Network).

A good spyware detector recommended by most people is, http://noadware.cjb.net and it shows you all the infections and potential dangers in great detail. It’s free to scan but not to clean. It’s a good idea to have a scan even you have no idea of cleaning, since you know the status of your PC in great detail. This gives two advantages.

Firstly, if there are minor infections and if you have a fair knowledge on registry settings and how to edit them, you may have a try to clean them up. Secondly, if it shows that there are major infections, you can avoid using credit cards and doing other confidential stuff, until you clean it up later.

You must run a firewall. In many new operating systems (eg. Windows XP), there is a built-in firewall. Google search on how to activate it. Others may try one at http://www.download.com.

You may have a question by now. What is the purpose of these spyware? Even though we cannot give an explicit and clear cut answer, we can safely state that every thing boils down to the urge of more profits. How? The spyware collects all your personal information and transfer it to an external computer. The information is reviewed by a software in the receiving computer and then deleivered targeted popup ads to your PC. There are many things that spyware does in addition to this. The most dangerous of those is that collecting the credit card numbers.

If you have some technical knowledge on your PC, here’s a technical explanation on what trouble does the spyware cause.

1. An extra process is running to monitor and log your activities in your PC.

2. Constant transfer is taking place between your PC and the spyware writer’s computer.

The first process in it self is an unneeded process and it contributes to slow down your PC. Second is the most harmful. It transfers logged info to the external PC (spyware writer’s PC). Then the external PC transfers targeted popups to the infected PC. This, in addition to slowing down your PC because of these extra processes, it also slows down the internet connection, as the bandwidth is shared. In short, PC with a spyware is like a dumping ground for snakes. Once its there and up and running, it can do almost anything with your PC.

Please pass this on to all you know. The most risk is for people who use Internet Explorer, as it is the most popular web browser and that very fact has drawn more attention of many malicious software developers.

About The Author

Fazly Mohamed - fazlymohamed@yahoo.com

More articles at articles database

ShareThis

By: Jerry White

Making straight hair curly is not a new hair style idea. Women in ancient Egypt coated their hair in mud, wound it around wooden rods and then used the heat from the sun to create the curls. Waves that won’t wash out are a more recent innovation. Modern perms were pioneered by A F Willat, who invented the “cold permanent wave” technique in 1934. Since then, improved formulations and ever more sophisticated techniques have made perm the most versatile option in hair style.

How Hair Perm works

Perm works by breaking down inner structures in your hair and reforming them around a curler to give a new shape. Hair should be washed prior to perming as this causes the scales on the cuticles to rise gently, allowing the perming lotion to enter the hair shaft more quickly. The perming lotion alters the Kertin and breaks down the sulphur bonds that link the fibre like cells together in the inner layers of each hair. When these fibres have become loose, they can be formed into a new shape, when the hair is stretched over a curler or a perming rod. Once the curlers or rods are in place, more lotion is applied and the perm is left to develop to fix the new shape. The development time can vary according to the condition and texture of the hair. When the development is complete, the changed links in the hair are re-formed into their new shape by the application of a second chemical known as the neutralizer. The neutralizer contains an oxidizing agent that is effectively responsible for closing up the broken links and producing the wave or curl permanently.

The type of curl that is produced depends on a number of factors. The size of the curler is perhaps the most important as this determines the size of the curl. Generally speaking the smaller the curler the smaller and therefore tighter the curl, whereas medium to large curlers tends to give a much looser effect. The strength of lotion used can also make a difference, as can the texture and type of hair. Hair in good condition takes a perm much better than hair in poor condition and fine hair curls more easily than coarse hair.

After a perm it takes 48 hours for the keratin in the hair to harden naturally. During this time the hair is vulnerable to damage and must be treated with care. Resist shampooing, brushing, vigorous combing, blow drying or set ting, any of which may cause the perm to drop. Once hair has been permed it remains curly and shaped the way it has been formed, although new growth will be straight. As time goes by the curl can soften and if the hair is long its weight may make the curl and the wave appear much looser.

Home Versus Salon Hair Perm

Perming is such a delicate operation that many women prefer to leave it in the hands of experienced, professional hair dressers. The advantages of having hair permed in a salon are several. The hair is first analyzed to see whether it is in fit condition to take a perm; colored, out-of-condition, or over-processed hair may not be suitable. With a professional perm there is also a greater choice in the type of curl - different strengths of lotion and different winding techniques all give a range of curls that are not available in home perm.

Home Rules For Perm Hair Style

If you do use a perm at home, it is essential that you read and follow the instructions supplied with the product. Remember to do a test curl to check whether your hair is suitable and check to make certain you have enough curlers. You will probably want to enlist the help of a friend, as it’s impossible to curl the back sections of your own hair properly, so you will need a helping hand. Timing is crucial - don’t be tempted to remove the lotion before the time given or leave it on longer than directed.

Salon Perms - The Choices

Professional hair dresser can offer a number of different types of perm that are not available for home use:

Acid perms produce highly conditioned flexible curls. They are ideally suited to hair that is fine, sensitive, fragile, damaged or tinted as they have a mildly acidic action that minimizes the risk of hair damage.

Alkaline perm give strong, firm curl result on normal and resistant hair.

Exothermic perm give bouncy, resilient curls. “Exothermic” refers to the gentle heat that is produced by the chemical reaction that occurs when the lotion is mixed. The heat allows the lotion to penetrate the hair cuticle, conditioning and strengthening the hair from inside as the lotion moulds the hair into its new shape.

Any of above types of perm can be used with different techniques to produce a number of results as under:- Body perm are very soft, loose perm created by using large curlers, or some times rollers. The results is added volume with a hint of wave and movement rather than curls. Root perms add lift and volume to the root area only. They give height and fullness and are therefore ideal for short hair that tends to go flat.

Spiral perm create romantic spiral curls, an effect that is produced by winding the hair around special long curlers. The mass of curls makes long hair look much thicker. Stack perm give curl and volume to one - length hair cuts by means of different sized curlers. The hair on top of the head is left unpermed while the middle and ends have curl and movements. Weave perms involve perming certain sections of hair and leaving the rest straight to give a mixture of texture and natural looking body and bounce, particularly on areas around the face such as the fringe.

Article Source:
http://www.articlecity.com/articles/women/article_2542.shtml

ShareThis

So somehow, we all get this idea that the database is some cabinet that holds all the data for a given organization.

But what is a database, anyway?

A database is any collection of data organized for storage in a computer memory and designed for easy access by authorized users. The data may be in the form of text, numbers, dates, or encoded graphics.

Since databases made their debut 1950s, they have become mightily important in the everyday operations of every major and even minor industry.

Databases make the output of needed data and reports easy, convenient, and almost instantaneous. This is a far cry from the barbaric methods once employed by every industry.

Those outdated methods included collating data from paper files whenever a report was needed. That process wasted a lot of time and effort. With the help of databases, these manual methods quickly found their demise.

Small databases were first developed or funded by the U.S. government for agency or professional use. But in the 1960s, databases became commercially available to the public.

However, their use was channeled through a few so-called research centers that collected information inquiries and performed them in batches. Online databasesthat is, databases available to anyone who could link up to them by computerfirst appeared in the 1970s.

Computer programs that manage and query a database are known as database management systems (DBMS). Database systems are actively studied in information science.

The overriding concept of databases is the idea of a collection of facts, or pieces of information. Databases may be structured in a number of ways, known as database models.

Database Models

Flat Model

The flat (or table) model consists of a single, two-dimensional array of data elements. All members of a given column are assumed to be similar values, and all members of a row are assumed to be related to one another. For instance, columns for name and password might be used as a part of a system security database.

Each row would have the specific password associated with a specific user. Columns of the table often have a type associated with them, defining them as character data, date or time information, integers, or floating point numbers.

This model is the basis spreadsheet systems such as Lotus 123 or Microsoft Excel. However, these applications are not typically thought of as databases per se.

Network Model

The network model allows multiple datasets to be used together through the use of pointers (or references). Some columns contain pointers to different tables instead of data. Many major industries adopted this model in the past few decades.

Relational Model

The relational model is the most popular of the database models today. This model is the basis for such database systems as Oracle, mySQL, and even Microsoft Access.

In this model, logically related data is kept in tables not unlike the flat model. However, unlike the network model in which tables are connected via pointers, the relational model is interconnected using keys or values within data rows in tables that point to other tables.

The SQL or Structured Query Language is used to manipulate and derive data from such databases.

More articles at database for articles

ShareThis

Auto sales contact management software enables users to simplify communications with clients. It manages all business contacts and activities, including e-mail addresses, phone numbers and contact addresses. The software keeps detailed records of customer contacts and activities in one centralized location, accessible to the entire organization through password administration. This effective tool is also useful for planning and tracking the progress of team tasks.

Auto sales contact management software has many features. Appointment tracking, call reminders, import/export features, address label creation, sales management reports, order entry and tracking, software generated telephone dialing, visual tracking of tasks status, data merge, flexible grouping and filtration of tasks, recurrence tasks setting and printing capabilities are a few of them. The software can quickly sort customer information by category, status and date. It also helps in identifying sales opportunities.

With auto sales contact management software, the volume of sales for a given date can be easily determined. In addition, it also serves to make sound management decisions regarding inventory. The software reduces the risk of manual processes and provides maximum flexibility to handle communications effectively.

Appropriate auto sales contact management software increases personal and professional productivity. It is simple to use and easy to learn. It is a good option for tracking all sales procedures in the automotive industry. Several auto sales contact management software packages are on sale in the market. Most of the software providers offer a free trial version and guarantee programs for their packages. Before choosing auto sales contact management software, it is always better to run a trial version to ensure that the software meets all business requirements.

More articles at article database

ShareThis

To access these images stored in the database we will be using the ADO.Net classes. To find out how to insert and retrieve an image in to the SQL Server database, you can create a .aspx page which can have a HTMLInputFile control which is used to select the image file that is to be saved in the database. You can also create a textbox control in which you can add the image name or some comment or an image id for the image saved. Use a button control to upload the image to the database. Namespaces like System.Data.SqlClient, System.Drawing, System.Data, System.IO, and System.Drawing.Imaging are used in this task.

In the OnClick property of the button you can write the following code to upload an image to the database.

// create a byte[ for the image file that is uploaded
int imagelen = Upload.PostedFile.ContentLength;
byte[ picbyte = new byte[imagelen;
Upload.PostedFile.InputStream.Read (picbyte, 0, imagelen);
// Insert the image and image id into the database
SqlConnection conn = new SqlConnection (@give the connection string
here…);
try

conn.Open ();
SqlCommand cmd = new SqlCommand (insert into ImageTable
(ImageField, ImageID) values (@pic, @imageid),
conn);cmd.Parameters.Add (@pic, picbyte);
cmd.Parameters.Add (@imageid, lblImageID.Text);
cmd.ExecuteNonQuery ();

finally

conn.Close ();

You can also write the above code in a function and call that function in the OnClick event of the upload button. The code given above performs the following steps in the process of inserting an image into the database.

1. Get the content length of the image that is to be uploaded
2. Create a byte[ to store the image
3. Read the input stream of the posted file
4. Create a connection object
5. Open the connection object
6. Create a command object
7. Add parameters to the command object
8. Execute the sql command using the ExecuteNonQuery method of the command object
9. Close the connection object

To retrieve the image from the SQL Database you can perform the following steps.

1. Create a MemoryStream object. The code can be something like, MemoryStream mstream = new MemoryStream ();

2. Create a Connection object

3. Open the connection to the database

4. Create a command object to execute the command to retrieve the image

5. Use the command objects ExecuteScalar method to retrieve the image

6. Cast the output of the ExecuteScalar method to that of byte[ byte[ image = (byte[) command.ExecuteScalar ();

7. Write the stream mstream.Write (image, 0, image.Length);

8. Create a bitmap object to hold the stream Bitmap bitmap = new Bitmap (stream);

9. Set the content type to image/gif Response.ContentType = image/gif;

10. Use the Save method of the bitmap object to output the image to the OutputStream. bitmap.Save (Response.OutputStream, ImageFormat.Gif);

11. Close the connection

12. Close the stream mstream.Close();

Using the above steps you can retrieve and display the image from the database to the web page.

You can use these algorithms and take advantage of the image data type available in the SQLServer 2000 database to store small images that correspond to a particular record in the table of the database. This method of storing avoids the tedious task of tracking the path of the web folder if the images are stored in a web folder.

Visit A Guide to .NET for a complete introduction to .NET framework. Learn about ASP.NET, VB.NET, C# and other related technologies.

More articles at articles database

ShareThis

By: Meryl Rougeaux

Pashmina shawls! Imagine this…you have to dress and you’re expecting it to be cold…and it is. But, when you get into your warm office, it gets too hot.

Is there some way that you can find a balance? …a happy medium that can help you feel warm when you want to be warm and cool down when you need to do that also? And at the same time feeling fashionable? It sounds like an impossible order to be accomplished. Can it be done?

Well, yes it can. What kind of fashion garment do you need to turn your winter wardrobe blues into winter wardrobe bliss? It’s hard to feel good about your clothing you wear when the temperature drops and you’re stuck wearing the same thing day in and day out. It really feels like your options are so limited as soon as snow appears on the ground.

Of course the answer are pashmina shawls. They are a comfortable, soft type of wool that feels and looks luxurious. A shawl allows you to keep warm when you need to but is convenient to carry and stow when you don’t need it. Just roll it up and put it in your office drawer or over your lap if you’re wearing a skirt. Then, when you need to go outside, wrap it around you and you’re ready to go!

These fashion items are versatile, practical, and in vogue. Scarves aren’t just for your shoulders? they also make beautiful, stylish head wraps for women who want to cover their heads. This could be for religious, fashion, or medical (chemotherapy) reasons.

There are so many reasons why you should wear one of these soft and warm garments. They come in a variety of sizes, colors, and with or without fringes so you have a wide choice to choose from. Get several and match them with a variety of outfits to multiply the potential outfits you have in your closet.

Why not put together a great pair with jeans and a top for a stylish look on a date or out with your friends? Or, wrap one around you to feel comfortable at the office (many offices are kept far too cold!). Or, surround yourself in a soft cashmere that matches your formal dress for those winter special occasions. They look great and you’ll feel great in them. They bring so much versatility to your wardrobe and bring a sense of refined fashion sense to how you carry yourself.

You don’t find that combination very often. Remember, these fashion statements have been around since the dawn of time and were used by women in various cultures for both practical and fashionable purposes. That’s no different today.

You’ll love yourself in one of these soft, luxurious pashmina shawls around your shoulders. Also, don’t forget to keep it together with a brooch pin. Shopping for the perfect brooch to match your wrap is almost as fun as shopping for the perfect scarf.

Article Source:
http://www.articlecity.com/articles/women/article_2459.shtml

ShareThis

By: Gabrielle Moore

Two Types of Female Orgasms

One of the biggest misconceptions people have about female orgasms is that they are all created equal. The truth is that not all orgasms are the same: they may all be equally pleasurable but they are generally arrived at through different means.

Basically, there are two types of female orgasms: vaginal and clitoral. In this chapter, we’re going to briefly discuss both types. This will provide you with some background that you’ll need when we can begin experimenting with orgasm-producing techniques a little later in the book.

Vaginal Orgasm

As you’ll recall from the first chapter, this type of orgasm was the only type Freud and other men of his time felt to be legitimate types of sexual pleasure for women to experience. Unfortunately for women, only about 20% can receive an orgasm through vaginal stimulation alone. The other 80% need something a little extra.

Before we get into that, let me explain exactly what we mean by vaginal orgasm. A vaginal orgasm occurs solely because of stimulation of the vagina. That stimulation is usually in the form of the thrusting of the male penis during vaginal intercourse.

The reason most women do not receive an orgasm just from penetration is that the vagina is not a highly sensitive area. This is actually a good thing. Remember that the vagina is not just used for sex but also for delivering babies. If the inside walls of the vagina were made up of concentrated nerve endings like we find in the nipple, the clitoris, or the penis, then childbirth would be even more difficult for women.

In fact, only the first two inches of the vagina are sensitive at all. So why do some women have orgasms solely from vaginal stimulation? The answer is they probably aren’t. Women who report vaginal orgasms benefit from their anatomy. In some women, the labia minora are formed in such a way that vaginal penetration actually causes the labia to rub against or gently pull on the clitoris. This, not vaginal stimulation, is leading to the orgasm in most cases. Technically, however, this would still be considered a vaginal orgasm because there is not direct stimulation of the clitoris.

Another reason why some women report having vaginal orgasms is that the shape of the penis and their preferred position allow for stimulation of the G-spot. Because the G-spot is linked to increased pleasure and may also induce orgasms, this is another possibility worth considering.

The bottom line here though is that vaginal orgasms are not common. Men and women need to realize that penetration is often not going to be enough to accomplish the goal. The good news is that gives both partners an excuse to experiment with some new things, including some we’ll discuss later in the book.

Clitoral Orgasm

By far the most common way for a woman to regularly reach orgasm is through direct or indirect clitoral stimulation. Before we just into that subject, I think it may help to share with you some information about the clitoris.

The clitoris is located just by the vaginal entrance and behind the labia minora. In most women, it is a small nub of flesh which contains a high concentration of nerve endings which make it highly sensitive. It is often covered by a clitoral hood. Many people don’t realize that only a small portion of the clitoris is actually visible. The remainder of the organ is surrounded by the rest of the reproductive system and extends all the way to the bottom of the pubic bone.

Two things are particularly interesting about the clitoris. First, all female mammals have a clitoris. This is interesting because the sole purpose, at least according to biologists, of the clitoris is sexual pleasure. That would seem to mean that humans aren’t the only ones who enjoy the way sex feels.

Second, the clitoris is made from the same material as the penis. In fact, in men the clitoris becomes a full-fledged penis after the embryo is exposed to testosterone in the womb. Just like the penis, the clitoris fills with blood and becomes erect during sexual arousal. The clitoral hood is essentially the same as the foreskin of a penis.

The only real difference between a clitoris and a penis ? besides location in the body ? seems to be that the penis is also used for urination while the clitoris is not.

With that said, its important to realize that the clitoris is really similar in size to the penis, even though most of it cannot be seen. Vibrations through the pelvic region caused by intercourse could stimulate the nerve endings in the unseen part of the clitoris as well and this can also cause orgasms.

What many people don’t realize about the clitoris is that the penis alone usually cannot stimulate it. Because of its position in the woman’s body, the ability of the penis to provide rhythmic stimulation to the clitoris is extremely difficult. That means traditional intercourse usually needs to be coupled with clitoral stimulation.

The question is how does one engage in clitoral stimulation. Some male partners take the approach that the women should be responsible for the stimulation themselves, which has always seemed a bit unfair to me since the woman is providing him with the stimulation he needs to reach orgasm. However, this is one way to deal with it.

Another method is by, what I like to call multi-tasking. Multi-tasking basically means the man does more than one thing at the same time. For example, he may be penetrating the vagina while also stimulating the clitoris in one way or another (we’ll discuss those ways a little later). If the couple wants to achieve orgasm at or near the same time, this is clearly the best option.

Other couples I’ve met with have resorted to an alternative approach. One person reaches orgasm at a time. Depending on how each person best reaches orgasm, this may be a possibility but it’s usually not the most satisfactory approach.

The best thing about clitoral orgasms is that they can be achieved in many different ways. Because the entire area is highly sensitive, experimenting with these types of orgasms can also add some interest and spice to sexual relationships which may have become less enthusiastic over time.

And the key is experimenting because different women prefer different types of clitoral stimulation. While some prefer direct stimulation, others find it uncomfortable and prefer to have the area around the clitoris stimulated instead. Women who have masturbated will generally have a much better idea of what type of stimulation they prefer than women who have not.

Before we close this chapter, let’s talk about what happens during a clitoral orgasm. As I mentioned above, the clitoris feels up with blood and becomes erect like a penis. This means its usually easier to spot when a woman is aroused. Because the clitoris does not need to be erect for sexual intercourse to occur, clitoral orgasms will only happen if the woman is aroused properly. That means some type of foreplay is generally a requirement. When the clitoris is stimulate repeatedly, it becomes more engorged with blood and this further heightens its sensitivity. With another stimulation a point is reached when all of the tension in the area must be released and this point is considered the orgasm.

Article Source:
http://www.articlecity.com/articles/women/article_2517.shtml

ShareThis

By: Gabrielle Moore

This article will teach you all about how women respond to sexual situations and some topics about the G-Spot. A part where you can stimulate it to give your partner quicker orgasm.

Female Sexual Response

The famous sex researchers, William Masters and Virginia Johnson, were the first to outline the four stages of sexual response in human beings. These stages apply to both men and women, but each gender experiences the stages differently. Men typically race through the stages faster than women do, but that’s only on average.

In some situations, women may be ready for orgasm much faster than a man. We’ll look at each of the stages as they occur in women and we’ll tell you what signs to watch for so you’ll be able to determine when your partner is ready for the next stage.

Stage 1 ? Excitement

* This is one of the easiest stages to reach for both men and women. A woman can become excited just by smelling your cologne or having your hand brush against her breasts. She can become excited by fantasizing about sexual encounters or by flirting with you during dinner. In fact, during the average date, women may become excited ten to fifteen times. Most of those times do not lead to the next level, however.

* The female body responds to this stage in very specific ways. Let’s go through some of those physical signs of excitement:

* Her nipples become erect

* Her vagina starts becoming lubricated

* Her clitoris begins to swell and grow larger

* The inner parts of her vagina begin to expand

* Her breasts may even increase in size if she becomes highly aroused

* These are not the only physical signs, but these are probably the ones you or her may notice. Notice that during this early stage, her vagina is already becoming lubricated. Many men have the mistaken notion that this is a sign that a woman is ready to engage in intercourse. That is not the case. A lubricated vagina only means a woman is aroused. All of these signs do suggest, however, that her body is preparing for the possibility of sex.

* Stage 2 ? Plateau

* This second stage does not occur as frequently as the arousal or excitement stage. In fact, most incidents of arousal never reach this level. So when does a woman reach this level? Well, she will require more physical stimulation. Foreplay, for example, will help her move to this stage, so does increased fantasizing.

During this stage, sexual tension inside her body is growing.

* This stage is also accompanied by more physical signs. A few of those signs are listed below:

* Breasts may increase noticeably in size

* The vagina swells and the vaginal opening begins to narrow

* The clitoris becomes more erect

* Her heart beat may increase noticeably

* The color of the labia minora will change from pink to either red or wine-color

* This final physical sign is very important. Researchers have found that if the color-change does not occur, then women rarely have an orgasm.

* About one-half to three-fourths of women also experience what is termed a ?sex flush? on parts of their body. The increased blood flow to the skin sometimes gives the appearance of a flush over the chest or other parts of the body.

* During the plateau stage, the woman’s body is becoming ready for intercourse. Only near the end of this stage is she physically ready for vaginal intercourse.

* Stage 3 ? Orgasm

* All of those women who fake their orgasms end up continually jumping from the second to the fourth stage of sexual response. After her body is truly ready for intercourse and if she is receiving the proper stimulation ? usually clitoral ? then it does not take long for her to reach the third stage.

* Below are some of the physical effects your partner will experience during this stage. Some of these should be noticeable by you and a couple are impossible for her to fake, so if you really want to know whether you are making her climax or not you just need to pay attention to the physical signs.

* Muscle contractions ? Intense muscle contractions through the pelvic area will occur during the orgasm. A woman can have three to fifteen of these contractions depending on the strength of her orgasm. She may also experience muscle contractions in other parts of the body as well.

* Most women’s bodies become temporarily rigid at the highest point of their orgasm. This lasts for only a moment, but its something you may notice.

* The ?sex flush? is another indicator of orgasm. At this stage, it becomes brighter and more noticeable. It may also have spread to other areas of her body.

* Another tell-tale sign of orgasm in some women is ejaculation. Some women do ejaculate after an orgasm.

* Although you won’t be able to see this, an orgasm can be detected by looking at a woman’s brain wave patterns. There is a clear difference.

* Stage 4 ? Resolution

* This is an interesting stage because what happens during it depends on what did not happen before or what is continuing to happen. For example, if a woman does successfully complete the third stage then she may be able to have multiple orgasms.

We’ll talk about that more a little later in this article.

* If a woman does not have an orgasm, then her body will begin to return to normal but it will take longer. Many women report physical discomfort in the pelvic area during this process.

* You should also keep in mind that after an orgasm a woman’s breasts and nipples will be incredibly sensitive. In fact, they can be so sensitive that touching them is uncomfortable for her.

* After the last orgasm, the ?sex flush? will disappear. * Also, your partner may experience heavy sweating, rapid heart beating, and/or heavy breathing.

* The resolution stage marks the end of the cycle for women.

* Multiple Orgasms & Sexual Response Cycle

* Multiple orgasms do happen in women. In fact, they are more common than researchers initially believed. Any time a woman has an orgasm she is capable of having a repeat if the right stimulation continues.

* What’s interesting about multiple orgasms in women is that they do not have to repeat the entire cycle to gain another orgasm. Once they are in the area between the third and fourth stages, their bodies are highly orgasmic.

Article Source:
http://www.articlecity.com/articles/women/article_2568.shtml

ShareThis

Now, suppose you are installing Microsoft Office on a windows operating system. Apart from copying the files the setup program will also copy all necessary office settings to the registry such as the user settings, which will be constantly referred to, to make the MS Office program run properly. Removing any office program will leave these entries in the registry. Since they no longer associated with a program they are redundant entries and take up space. They need to be cleaned with a registry cleaner.

How The Registry Can Get Crammed

This is as far as installing programs is concerned. When you surf the Internet, you need to view certain sites that need ActiveX controls for the page to display properly. If the ActiveX component is not installed on the system the site will prompt the system to download the ActiveX component that is stored in the registry as an OCX file. Imagine how many times you must be downloading these components that keep filling up the registry. You will probably never visit that site again because you were just browsing the web. Nevertheless, these components cram the registry and reside there unless they are removed by registry cleaner software.

Where To Get Registry Cleaners?

A search on the Internet will bring up many registry cleaners. These registry cleaners can downloaded and used free to clean the registry and make the system run smoother and faster. A crammed registry will make the system unstable and it will begin to slow down to a crawl. This will take a few months depending on the use of the system and the use of the Internet. Finally the system will crash and a lot of data will be lost if steps are not taken to clean the registry with the relevant software such as free Microsoft registry cleaner and free registry trial cleaner.

More articles at articles host

ShareThis

In this article, we’re going to take a look at MO technology, and how its reliability is actually just as good as…and better, than the average 3.5 hard drive.

Magneto-Optical Technology

Basically put, a laser beam (tuned at around 680nm and 0.7 microns in diameter) is projected onto the media disk (made mostly of polycarbonate), where the beam heats a particular layer on the disk to Curie Point (the temperature at which a magnetic substance loses its coercive force, which is 200 C), thereby enabling the magnet within the drive itself to easily contour the polarization of the disk. Once this is done, the drive can quickly switch the polarization of the magnet, creating a data mark on the disk. When reading a disc, the laser beam is polarized and the reflected light is interpreted into data.

MO Technology is kind of like a cooking recipe. For example, to make different shapes of candy, you have to heat the sugar to a point where you can move the candy base around and shape it with your hands or molds, before it gets cold. This is what the laser inside MO drives are doing. They are heating up an area on the disk so that when a magnet is brought within a specific distance, the magnet can change the properties of the disk. Then, when the disk is not in use, the disk is hard, and is able to be read over and over without fear of data contamination due to the way it was recorded.

Reliability Of MO Technology

Each MO disk is certified to be read over 1,000,000 times. Now, chances are, you will be moving your data off an MO disk before you reach the one-million mark. And even if you do not, chances are again you probably won’t have even reached the half-way point.

In addition to the high repetitive rating of the MO disks, the disks also have high tolerances to temperature. The Curie Point of MO disks is 200 degrees centigrade, which means anything below that temperature will not affect the data on the disk. Try to operate a typical hard drive in temperatures like these. We’re talking 392 degrees Fahrenheit.

Why Is MO Technology Mostly Unknown To The Consumer?

For a technology which is superior and more reliable than the current hard drive in your computer, this is certainly an interesting question. However, we find the answer in terms of marketing sensationalism over the years. MO Technology is not as dynamic as regular magnetic drives, and currently do not have the ever-increasing capacities as a typical 3.5-inch magnetic drive over a short time span. 500 Gigabyte drives are now found online and in your favorite computer store. But try to find a Fujitsu MO drive and you’ll receive several scratchings of the head from sales associates when you mention the technology and the model numbers.

Why?

It’s simple marketing and what sells. Larger numbers sell. Why buy a drive for $280 and a 5-pack of 5-2.3GB MO disks for another $100, when you can buy a 300GB hard drive for around $250? It’s that kind of thinking which can get you into trouble. Many of us need to understand that smaller capacities can actually be better for us, and actually cost us less money in the long run.

In the next part of the article, we’ll take a further look into MO Technology.

More articles at database for articles

ShareThis